config.arm64_v8a

config.xxxhdpi

config.en

Everyone

MHD Tuning UG

Lollipop

MHD Flasher is the first Android handheld application to bring ECU tuning and monitoring to the BMW N55 engine for E series. The MHD Flasher reveals the good margin of power BMW left on the table with the N55 while still retaining the sophistication of the original engine management program.

→ Easy to install 
Connect any compatible Android device to your car using a standard K+Dcan cable along with an OTG USB adapter, install one of the pre-purchased MHD maps and enjoy the power and performance benefits of the MHD maps by Twisted Tuning. 

→ Keep an eye on the tuning
Monitor your engine behavior using a configurable gauges layout to keep an eye on any of the 50+ engine monitors like oil temp, boost pressure, actual load or individual cylinder ignition timing. Activate the logging mode to save up to 50 monitors to a standard CSV file for later analysis. Track issues by reading the error codes, and delete them once resolved.

→ Flash your ECU back to a stock anytime, as often as you need to. No ECU backup is needed.

→ Custom tuning support
As an alternative to built-in maps, many tuners can provide advanced custom mapping for those who have higher or special performance needs. 

Main features description:

═══ Flasher module ═══
- Flash built-in maps (purchased separately), custom user-tuned .BIN files or JB4 flash maps.
- Provides an ever growing list of handy options like PPK exhaust burble duration or cold start noise reduction.
- Read / delete engine trouble codes.
- Reset the main DME adaptation values.
- 4 minutes map switching; initial install time: 33 mins (this will be improved later).

═══ Monitor module ═══
- Extensive logging values list, up to 50 values at the same time.
- Save logging session to .CSV files
- Integrated csv log viewer
- Up to 8 configurable gauges

═══ Optional MHD maps packs ═══
- Maps by Twisted tuning
- Stage 1 pack. Eight maps: 4 fuel octane variants, stock / upgraded FMIC variants.
- Stage 2 pack. Eight maps: 4 fuel octane variants, stock / upgraded FMIC variants. High flow downpipes recommended.
- Ethanol mix map (e30). FMIC+DPs recommended.

Supported vehicles: N55 equipped Exx series. 

2010-2013 135i, 135is and 335i
2013-2015 X1 35i
2010-2013 X5 35i
2011–2014 X6 35i

This racing product is for competition closed course use only.

Required hardware:
- 1 device running Android 3.2 and up, USB OTG compatible.
- 1 K+Dcan cable. See page 5 of the user manual for a recommended cable: http://www.twisted-visionz.com/mhdguide
- 1 USB OTG cable.

Price list (licenses are VIN Locked and stored by Google along your Play store account):
- Flasher module: $199
- MHD maps packs: $49 each. Requires the Flasher module.
- Monitor module: $69

FAQ

Q: Does my Android device need to be permanently plugged to the OBD port?
A: No. Once a flash is performed you can unplug your device.

Q: Do I lose my licenses if I delete the app or the Android device breaks?
A: No. licenses are stored online by Google, you can use your purchases on another device as long as you use the same account on Play store.

Q: Do I need to purchase a new license each time I flash a map?
A: No, you can ref lash as many times as needed.

Q: Is a battery charger required?
A: It is highly recommended for long flashes (install, uninstall). A healthy battery will handle short flashes (map changes) fine but the use of a battery charger remains recommended.

Q: How can I determine if the DME is directly flashable or needs a one time bench flash?
A: got to http://www.realoem.com/bmw/enUS/select and enter the last 7 digits of your VIN in serial number. Click Browse parts the ENGINE ELECTRICAL SYSTEM and check both CONTROL UNITS > MEVD1726 section. If the it says "No parts found matching your car." you have a MEVD172 which is directly flashable.
MHD Flasher是第一个将ECU调整和监视功能引入E系列的BMW N55发动机的Android手持式应用程序。 MHD闪光器揭示了宝马凭借N55保留在桌子上的强大动力余量，同时仍保留了原始发动机管理程序的先进性。

→易于安装
使用标准的K + Dcan电缆和OTG USB适配器将任何兼容的Android设备连接到您的汽车，安装预购的MHD地图之一，并享受Twisted Tuning提供的MHD地图的功能和性能优势。

→留意调音
使用可配置的仪表盘布局来监视发动机行为，以密切注意50多个发动机监视器中的任何一个，例如油温，增压压力，实际负载或单个气缸点火正时。激活日志记录模式，最多可将50个监视器保存到标准CSV文件中，以供以后分析。通过读取错误代码来跟踪问题，并在解决后将其删除。

→随时根据需要将ECU刷新回库存。无需ECU备份。

→自定义调整支持
作为内置映射的替代方法，许多调谐器可以为具有更高或特殊性能需求的用户提供高级自定义映射。

主要功能说明：

═══闪光灯模块═══
-Flash内置地图（单独购买），自定义用户调整的.BIN文件或JB4 Flash地图。
-提供了越来越多的便捷选项，例如PPK排气爆震持续时间或冷启动降噪。
-读取/删除发动机故障代码。
-重置主要的DME适配值。
-4分钟地图切换；初始安装时间：33分钟（稍后会有所改善）。

═══监控模块═══
-广泛的日志记录值列表，最多可同时显示50个值。
-将日志记录会话保存到.CSV文件
-集成的csv日志查看器
-多达8个可配置的压力表

═══可选的MHD地图包═══
-通过扭曲调整的地图
-阶段1包。八幅图：4种燃料辛烷值变体，库存/升级的FMIC变体。
-阶段2包。八幅图：4种燃料辛烷值变体，库存/升级的FMIC变体。建议使用大流量落水管。
-乙醇混合图（e30）。推荐使用FMIC + DP。

配套车辆：配备N55的Exx系列。

2010-2013 135i，135is和335i
2013-2015 X1 35i
2010-2013 X5 35i
2011–2014 X6 35i

该赛车产品仅用于封闭比赛。

所需的硬件：
-1台运行Android 3.2及更高版本，兼容USB OTG的设备。
-1 K + Dcan电缆。有关推荐的电缆，请参见用户手册第5页：http://www.twisted-visionz.com/mhdguide
-1条USB OTG电缆。

价目表（许可证已被VIN锁定并由Google沿您的Play商店帐户存储）：
-闪光灯模块：199美元
-MHD地图包：每个49美元。需要Flasher模块。
-显示器模块：$ 69

常问问题

问：我的Android设备是否需要永久插入OBD端口？
答：不可以。执行闪光灯后，您可以拔下设备的电源。

问：如果删除应用程序或Android设备中断，是否会丢失许可证？
答：编号是由Google在线存储的，只要您在Play商店中使用相同的帐户，就可以在其他设备上使用购买的商品。

问：每次刷新地图是否都需要购买新的许可证？
答：不，您可以根据需要多次鞭打。

问：需要电池充电器吗？
答：强烈建议您进行长时间闪烁（安装，卸载）。健康的电池可以很好地处理短时闪烁（更改地图），但仍建议使用电池充电器。

问：如何确定DME是否可直接闪烁或需要一次台式闪烁？
答：进入http://www.realoem.com/bmw/zh-CN/select，然后输入序列号中VIN的后7位。单击浏览引擎电气系统的零件，然后检查两个控制单元> MEVD1726部分。如果显示“找不到与您的汽车匹配的零件”。您有一个可直接闪烁的MEVD172。


MHD N55 E-series

MHD N55 E-series的最新版本

其他版本